Cover with light trap

These covers are specially developed for the Flash 3300 and they also fit on all other air inlets.

Description

These covers are specially developed for the Flash 3300, but they also fit on all other air inlets. It is a perfect alternative for sheet piling; a plus-point is that you can click the light trap under it later on. Because of this you can load the chicken during the daytime!

Advantages of the cover:

  • Inlets till 600 mm 1 cover, wider inlets -> 2 covers
  • Enormous reduction of the influence of wind and rain
  • The cover will fit any type of wall
  • Constructed of black UV resistant plastic

Advantages of the optional light trap:

  • Full black out of the air inlet (loading during the daytime)
  • By night no attraction of insects because of light shine through the inlet, and therefore less cross-over of animal illnesses such as Campilobacter.

cover_lightfilter_airinlet.02    cover_lightfilter_airinlet.03
The possibility of assembling and disassembling without special tools makes the Tulderhof light trap unique!

Technical information cover with light trap

Type Without light trap With light trap
10 Pa – m3/h 2,400 1,600
20 Pa – m3/h 3,300 2,300
Surface cm2 1,800 1,250
Width – mm 670 670
Height – mm 490 660
Depth – mm 300 340

Sizes cover with light trap

cover_lightfilter_airinlet.02

The cover can be mounted with 7 screws on any type of wall. The mounting set also contains 2,5 meter of swelling tape. You can stick this on the flange of the cover first; this will result in a jointless connection of the cover and the wall.

cover_lightfilter_airinlet.04

 

Windkap_1

Windkap_2

Windkap_3

Windkap_4

Windkap_5

Windkap_6

Download the leaflet for the cover with lighttrap here

Download the mounting manual for the cover with light trap here

Mounting cover with light trap

TOP